Textile Automatic Cutting Machine

High accuracy, multi-functional cutting system which is especially designed for small quantity and customized production.
The available cutting width 0.9m or 1.6m, and the ctting length of machine has 6 specifications and can be customized by clients' requirement which can meet different standards for cutting workshop.

Fixed type cutting table
Long life bristle. Can reduce the cost of the consumption materials.
Available to pick up from cutting end zone (with notification lamp for picking-up zone).
Knife-reciprocation realizes high precision, fast, speed and low-cost of consumed materials.
Self-Diagnosis Function when meeting troubles, the cause and solution for the trouble will appearon the screen automatically.
Homogeneous grinded blade of double-wheel grinded stones, making sure the cutting precision and improving the cutting speed.
The time interval for grinding knife can be freely adjusted and set according to the materials.
Delicate knife particularly for any kind of curves.
Paper mat is not required in certain materials.
Simple and convenient operating.

TAC-M series A B

TAC-M16XX 1933 2320

TAC-M09XX 1233 1620

* The available cutting length is 5m, 6m, 8m, 9m, 11m, 12m.

Technical Specification TAC-M1605 TAC-M0906

Available Cutting Area 1600 x 5000 900 x 6000

Spreading material height(after vacuum absorption) Max. 5mm

Cutting Method Knife-reciprocation

Machine Speed Max.60mm/min

Power AC380V/50Hz
Max.22KW

Compressed Air Power Air Pressure 0.55MPa(5,5kgf/cm)
Air Consumption 60NL/min

Connection between CAD & CAM Net connecting/Floppy Disk/Barcode Reader

Knife Grinding System Double Wheel Grinding Stone

Total Weight(Kg) 2000 1600

* According to various available cutting length, you could adjust available cutting area.

Caution Light
Beside each sectoring area of the machine, there are 2 caution lights, when cutting table is working, the caution light in cutting zone will light on and when the cutting table stops working, the caution light will put out automatically, ensuring the safety of the operation in the cutting zones.
Safe Device
The yellow safe bar is one both sides of the machine head. When the operator touches the bar without care, the machine head will stop automactically, avoiding touching the operator to ensure the safety on them.

Back | Top | About Us | Products | Product Demo | Bulletin Board | FAQ | Contact Us

Please email/fax to us for more information.

TAC-M series	A	B
TAC-M16XX	1933	2320
TAC-M09XX	1233	1620
* The available cutting length is 5m, 6m, 8m, 9m, 11m, 12m.


Technical Specification		TAC-M1605	TAC-M0906
Available Cutting Area		1600 x 5000	900 x 6000
Spreading material height(after vacuum absorption)		Max. 5mm
Cutting Method		Knife-reciprocation
Machine Speed		Max.60mm/min
Power		AC380V/50Hz
		Max.22KW
Compressed Air Power	Air Pressure	0.55MPa(5,5kgf/cm)
	Air Consumption	60NL/min
Connection between CAD & CAM		Net connecting/Floppy Disk/Barcode Reader
Knife Grinding System		Double Wheel Grinding Stone
Total Weight(Kg)		2000	1600


Caution Light Beside each sectoring area of the machine, there are 2 caution lights, when cutting table is working, the caution light in cutting zone will light on and when the cutting table stops working, the caution light will put out automatically, ensuring the safety of the operation in the cutting zones.
	Safe Device The yellow safe bar is one both sides of the machine head. When the operator touches the bar without care, the machine head will stop automactically, avoiding touching the operator to ensure the safety on them.