ST-10

Applicaions The machine is ued for knotting & Wrapping of the buttons after providing looseness in a Button stitch machine. This process provides a strengthen stem of Button which is attached to the fabric with looseness. By using this processthe button hole placket fits easily into to the button placket. Although after fixing the button, there is no expanding view of the buttonhole.

Outstanding Productivity and High Product Quality With the max. sewing speed at 3000spm, this sewing machine delivers high productivity. All types of working motions were throughly analyzed and reflected for optimized machine operation. AS a result, it could produce best quality sewing products, responding to all possible working conditions for Buton Knots. Electronic control mechanism has been adopted instead of mechanical cam. It stands out in making various types of operation like Knotting & Wrapping in small volume with elevated productivity.

Stable and uncredible sewing machanism Stable and beautiful stitches are realized through the adoption of advanced mechanism and installation of stepping motors controlled by microprocessor. Perfect lockstitch mechanism used for knotting by using powerful stepping motor controlled by microprocessor without using any needle & hook set.

Features Fully programmable LCD Operation panel: Possible to selct Button type(Flat/Shank) Wrapping & Knotting frequency can be programmed. Button height can be programmed. Thread cuttingOn/Off canbe programmed. Daily production counter is available. Different language can be selected. Guide line to thread themachine is provided. Knotting & Wrapping sequence can be programmed.

Wrapping Mechanism
The Stepping Motor controlled by Micro Processor ensures that Wrapingfrequency is eqully divided between the Button and the Fabric. The distance can be programmed on the LCD display panel.

Knotting & Wrapping Option The default setting in the machine is programmed as one knotting in starting, wrapping, three knotting in end. There is a programming facility available in control panel option as below: Knotting, Wrapping, Knotting. Knotting. Wrapping	Easy to Operate The dynamic design of the mechanism is suitable for higher productivity by using single operator handling two machines at the same time. Operator has to feed the button into the slot only & push start button near to the disk. Once the cycle time get complete as programmed by us, the machine stops automatically & the tread gets trimmed.

Knotting Mechanism Individual arms controlled by Micro Processors and Steppng Motor ensured a perfect double hand made knotting without any use of needle and hook assembly.

Threading Mechanism By using pneumatic easy system, it is easy to thread the machine without ant delay. The way of threading is also explained in the LCD display panel.

Working Mechanism Powerful stepping Motors controlled by Microprocessors are used for different individual motion such as FrontBack motion, Wrapping, Knotting.

Thread Trimming Mechanism By using pneumatic thread trimming system, it is guaranteed that there will be no damaged to the Button as well as the fabric.

	For any type & size of any Buttons
	Button Type Diameter Height Thickness Flat 1-40mm 1-10mm 1-2.5mm Flat 1-40mm 1-10mm 1-2.5mm

The speed is very fast(3000spm) thus the operation time is only 3.5 sec on 50 wrapping frequency.
WrappingFrequency Knotting Frequency 1-3000 1-3(Max. 50) Specifications: Dimension 400 x 270 x 250mm Weight 20Kg Air Consumption 0.32nl or 0.2cfm Air Pressure 4-5kg/cm² Power Cycle Voltage Control System In-Built SMPS	Other Features: Sensor-working start button allows for easy use. Very fast (3,000rpm) amd very simple mechanism. Self-diagnosis system makes the machine stable. Elastic thread canbe used for normal wrapping only.

Top | About Us | Products | Product Demo | Bulletin Board | FAQ | Contact Us

Please email/fax to us for more information.